Unitech ENTERPRISE PA500 - Manual (Page 31)

Chapter 3 Getting Connected
25
6. Align the IR port of your device with that on your computer.
7. Open ActiveSync on your device.
8. Tap Menu
→ Connect via IR.
To setup a Bluetooth ActiveSync connection:
Your device is equipped with Bluetooth wireless technology that you can use to synchronize information
with a computer equipped with a Bluetooth adapter or access point. Bluetooth wireless technology
allows you to communicate with the computer whenever it is within range.
1. Configure the Bluetooth connection on your computer. Refer to the Windows Online Help for
instructions.
2. Ensure Bluetooth is turned on your computer and discoverable and within close range.
3. Make your device discoverable to your PC by tapping Start
→ Settings → Connections tab →
Bluetooth.
4. On the Mode tab, select the check boxes for the “Turn on Bluetooth” and “Make this device
visible to other devices” check box.
5. Tap ok.
6. On your device, tap Start
→ Programs → ActiveSync.
7. Tap Menu → Connect via Bluetooth.
If authentication is required, the Enter Passcode screen appears, type an alphanumeric
passkey (PIN code), then tap Next; enter the same passkey on the computer.
If you do not want to use a passkey, tap Next.