Adjusting the backlight setting – Unitech ENTERPRISE PA500 User Manual
Page 50
44
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Adjusting the Backlight Setting
The power consumption of the LCD backlight is high, turn off the backlight function if it is not necessary.
To adjust the Backlight setting:
1.
Tap Start
→ Settings.
2.
On the System tab, tap Backlight.
3.
On the Battery Power tab, do either of the following:
– Tap the “Turn off the backlight if device is not used for” check box and change the amount of
time before the unit turns off the backlight while running in battery power mode.
– Tap “Turn on backlight when button is pressed or the screen is tapped” check box.
4.
On the External Power tab, do either of the following:
– Tap the “Turn off backlight if device is not used” check box and change the amount of time
before the unit turns off the backlight while running in external power mode.
– Tap the “Turn on backlight when a button is pressed or the screen is tapped” check box.
5.
Tap ok.