Unitech ENTERPRISE PA500 - Manual (Page 17)

Chapter 2 Using the Hardware
11
Using the SDIO/MMC Slot
Your device has an expansion slot compatible with a range of SD, SDIO, and MMC storage cards,
which are primarily used to back up or transfer files and data.
To insert a storage card:
1. Hold the device securely, then lift the rubber cover from the SDIO/MMC slot .
2. Push the card into the slot until you hear an audible system sound; this will signal that the card
is already properly seated within the slot.
The card is secure when it is not protruding from the slot.
To remove a storage card:
1. Hold the device securely; then push against the top of the card, as if you were pushing it further
into the slot, letting the card spring out. An audible system sound will signal that the card has
been released.
2. Gently remove the card from the slot.