Unitech ENTERPRISE PA500 - Manual (Page 18)

12
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Using the Laser Scanner
PA500 has an integrated laser scanner which reads all major barcode labels with excellent
performance.
NOTE:
The reading software must be enabled in order to operate the scanner. This can be a
user-loaded application or a pre-loaded utility such as Scanner Settings.
To scan a barcode:
1. Launch the Scanner Settings application.
a. Tap Start
→ Settings.
b. On the System tab, tap Scanner Settings.
In the Scanner Control Panel screen, you can configure barcode scanner parameters such
as enabling or disabling barcode symbologies, setting data transmission options,
configuring magnetic and proximity reading options, and setting power management
options.
c. On the Settings tab, tap Barcode IDs.