Uniden XCA4500 - Manual (Page 10)

Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
CAUTION:
•
Never install telephone wiring during a lightning storm.
•
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
•
Use caution when installing or modifying telephone lines.
Applying Power to the Base Unit
The XCA4500 requires a standard electrical outlet (120 volts AC without a
switch to interrupt power) and the included AC adapter. Connect the adapter
as shown below.
1. Wrap the power cord around
the convenient notch on the
bottom.
Important: Place the power
cord so that it does not create
a trip hazard, or where it
could become chafed and
create a fire or other electrical
hazards.
2. When power is first applied,
the Message Counter LED
display flashes
P quickly
while the system’s memory
initializes. When the flashing
slows, press the
STOP button
on the Base Unit.
3. The Message Counter LED
display turns off, and the time
and remaining message
record time are announced.
Note: For information about
turning the Answering
System On/Off, see page 46.
NEW MESSAGE
STOP PLAY REPEAT
ANS ON/OFF OGM MEMO INTERCOM
SKIP
DELETE
Digital Answering System
PAG E / F I N D
P
NEW MESSAGE
STOP PLAY REPEAT
ANS ON/OFF OGM MEMO INTERCOM
SKIP
DELETE
Digital Answering System
PAG E / F I N D
10