Uniden XCA4500 - Manual (Page 54)

Setting the Calling Party Control Switch
The Calling Party Control ( CPC ) switch sets your Answering System to
disconnect and reset if the caller hangs up before leaving a message. This
prevents your Answering System from using recording time to record a hang
up/dial tone message.
Note: It is possible that if someone calls while your outgoing message is
playing or when a message is being recorded and you have
Call
Waiting , that the Answering System will disconnect and reset. To
prevent this you can set the CPC switch to off.
Setting the Toll Saver Switch
The Ring Number/Toll Saver switch allows you to set the number of rings the
caller hears before your Answering System answers. You can set the switch
to answer after
2 rings or after 5 rings. In the TS (Toll Saver) position, the
Answering System answers after two rings if you have messages recorded,
and it answers after five rings if there are no messages. So if you call long
distance to check your messages, you can hang up after the second ring
and not be billed.
RING SW
2-5-TS
PULSE-TONE
TEL-LINE DC IN 9V
RESET CPC
OFF-ON
REC TIME
ANN-1
RING VOL
OFF-LO-HI
+ -
CPC
OFF-ON
RING SW
2-5-TS
PULSE-TONE
TEL-LINE DC IN 9V
RESET CPC
OFF-ON
REC TIME
ANN-1
RING VOL
OFF-LO-HI
+ -
RING SW
2-5-TS
54