Uniden XCA4500 - Manual (Page 33)

Using the Two-Way Intercom
The Two-Way Page/Intercom feature allows you to communicate between
the Base Unit and the Handset. To use this feature:
•
The RING ON/BATT SAVE Switch on the Handset must be in the
RING ON position.
•
The BASE UNIT RINGER Switch must be set to either LO or HI .
Note: If you are on a call while using the Handset and you page the Base
Unit, the Base Unit will ring even when the Base Ringer Switch is set
to the
OFF position.
Two-Way Paging
Paging the Base Unit
:
3
1
2,3
1. Press J on
the Handset.
Note: If there is no
answer, press
J again to
cancel.
2. Press INTERCOM on
the Base Unit to
answer page.
The IN USE and
TALK/BATT LOW
LEDs light.
To end the
conversation:
3. Press T on
the Handset or
INTERCOM on the
Base.
33