Uniden XCA4500 - Manual (Page 75)

2. Speak into the microphone.
When you are finished
recording, release the
MEMO
Button.
There is a tone, and the
NEW MESSAGE LED begins to
flash. The Message Counter
LED shows the total number
of messages stored in
memory.
3. After you have recorded your
message, the system returns
to Standby.
Note: If you have new or
unplayed messages, the
NEW MESSAGE
LED on the
Base Unit continues to flash.
If all the messages have
been reviewed, the
NEW MESSAGE
LED remains
on but doesn’t flash.
NEW MESSAGE
STOP PLAY REPEAT
ANS ON/OFF OGM MEMO INTERCOM
SKIP
DELETE
Digital Answering System
PAG E / F I N D
75