Uniden XCA4500 - Manual (Page 53)

Selecting a Preset OGM
After you have recorded an outgoing message, you can set your Answering
System to play either a preset message or your outgoing message.
1. Press OGM .
Your recorded outgoing
message will begin to play.
2. While your recorded outgoing message is playing, press OGM again.
A tone will sound, and you hear the preset message “Hello. No one is
available to take your call, please leave your message after the tone”
on the Base Unit speaker. A second tone sounds after the preset
message plays, and the Answering System automatically returns to
Standby.
Note: If the REC TIME/ANN-1 switch is set to Announce Only, then the
preset message “Hello. No one is available to take your call” is played.
3. To select your recorded
message again, press
OGM .
The preset message will
begin to play on the Base
Unit speaker.
4. While the preset message is playing, press OGM again.
A tone will sound, and your recorded message will play on the Base
Unit speaker. A second tone sounds after your message plays, and the
Answering System automatically returns to Standby.
NEW MESSAGE
STOP PLAY REPEAT
ANS ON/OFF OGM MEMO INTERCOM
SKIP
DELETE
Digital Answering System
PAG E / F I N D
0
NEW MESSAGE
STOP PLAY REPEAT
ANS ON/OFF OGM MEMO INTERCOM
SKIP
DELETE
Digital Answering System
PAG E / F I N D
0
53