Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 11)

Uniden Data 2000 Installation and Operation Manual 2-3
2.2 Uniden Data 2000 Host Application Installation
The Uniden Data 2000 host applications, UDConfig and UDInsight are
distributed on a CD-ROM and floppy disks: the Uniden Data 2000
Setup and Installation CD-ROM and floppy disks. These applications
must be downloaded to the host terminal, in order to set up the host
applications to use with the Uniden Data 2000.
To install and set up the UDConfig and UDConfig host applications,
take the following steps:
1. Insert the Uniden Data 2000 Setup and Installation CD-
ROM or floppy disks into the CD-ROM or floppy
disk drive.
2. Click the Start button.
3. Select Run.
4. In the Run dialog box, enter the command line d:\setup (if
the CD-ROM drive is D).
Note: For floppy disks, the drive is typically “A” instead of “D”:
5. Follow the instructions provided by the Setup Wizard to
complete installation. The Uniden Data 2000 host
applications will be copied to the location you specify on the
host system, and desktop and task bar icons will be created for
each application.
▲ ▲ Uniden Data 2000 Wireless CDPD PC Card