Uniden Data 2000 Wireless CDPD PC Card User Manual
Page 73
▲
▲
Uniden Data 2000 Wireless CDPD PC Card
Uniden Data 2000 Installation and Operation Manual
2-65
2.11.2 UDInsight
UDInsight provides insight to the user regarding the state and status of
the Uniden Data 2000. The application works when the Uniden Data
2000 is in SLIP/PPP mode and a Winsock is in place and running.
Winsocks include Windows 95/98/NT/CE Dial-up Networking,
Trumpet, and other similar applications resident on a Windows
95/98/NT/CE platform.
When the Uniden Data 2000 is in SLIP/PPP mode and a Winsock is in
place, applications communicate to the Uniden Data 2000 with UDP
over IP packets, and sends a request for information from the Uniden
Data 2000. The Uniden Data 2000 replies with a response that includes
the following data:
channel - Current channel
rssi - Received signal strength indication. Add to -113 to get true
RSSI in dBm
regstate - Registration state. 0= No; 1=Yes
reg_result - Registration result code
spni - Service provider network ID
cell_num - Current cell number
wasi - Wide area service ID
spi - Service provider ID
data_sent - Bytes sent
data_rcvd - Bytes received
active_nei [NEI_LEN] - Current IP address
These packets are sent and received (once every 5 seconds)
depending on the users selected polling rate of UDConfig.
The following dialog box displays when UDInsight is accessed: