Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 89)

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card
Uniden Data 2000 Installation and Operation Manual D-7
AT Command Syntax Description of Command
AT ENCR? Read Data Encryption Mode from a
[CAT][MDT][UDT][SPDT] particular default table.
(If the option is not specified, the CAT will
be used as the default table.)
Response: Encryption Flag 0 or
Encryption Flag 1
Encryption Flag 0 means encryption is off,
Encryption Flag 1 means is on.
AT FC? Read flow control mode from the
System Table.
Response: Flow control mode 0,
Flow control mode 1
Flow control mode 0 means flow control is
off, Flow control mode 1 means flow
control is on.
AT HWVER? or ATI0 Read the hardware version of the Modem
from the System Table.
Response: U D 1000 n.n
AT IP? Read the active NEI number from a
[CAT][UDT][MDT][SPDT] particular default table.
(If the option is not specified the CAT will
be used as the default table.)
Response: Active IP n (n = from 1 to 10)
AT NEIn? Read NEI n (n = from 1 to 10) from the
System Table
Response: NEIn ddd.ddd.ddd.ddd
AT PREFER? Read the side preference from a particular
[CAT][UDT][MDT][SPDT] default table. Side A includes channels
1-333, 667-716, and 991-1023.
Side B includes channels 334-666
and 717-799.
(If the option is not specified the CAT will
be used as the default table.)
Response: Side Preference n