Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 80)

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card
C.1.1 Requirements for Software Installation
● DNLD.EXE - A software downloading utility that can run
under both Windows 95/98 and Windows NT.
● PPCard dnl
C.1.2 Uniden Data 2000 Software Downloading
Instructions
1. Insert the Uniden Data 2000 to a PC Card slot.
2. Create a directory such as UD2000 in a local hard drive and
copy dnld.exe and pccard.dnl files into it from the
installation CD-ROM.
Note: You may use a latest download file obtained from
other source.
3. From the PC, click Start and open an MS DOS prompt from
Program.
4. Select the directory in which you copied the files, using the
DOS command cd <DIRECTORY NAME>.
Example: cd UD2000
5. Type in the command DNLD PCCARD.DNL -port <COM
port> -atrate <baudrate> -dlrate<baudrate>.
Example : DNLD PCCARD.DNL -port COM2 -atrate 9600 -dlrate
57600. (This option directs the PC Card to use PC COM port 2 and
sets the atrate, to 9600, and baudrate to 57600.)
Important : The atrate and baudrate must match in
order for a successful download to occur.
● The following progress message displays on screen:
Example:
Opening COM2
Looking for Uniden Data device
Sending AT commands at 9600
Uniden Data 2000 Detected
Reading BOOT software directory
Reading main software directory
Downloading the following image:
C-2