VTech i 5836 - Manual (Page 15)

13
Setup Of The VT 5820/ i 5801
Accessory Handset
1. Plug the AC power adapter into
an electrical outlet.
2. Remove the Handset battery
compartment cover by pressing
on the indent and sliding down-
ward.
3. Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4. Replace the battery compart-
ment cover by sliding it upward.
5. Place the Handset in the Charger,
and allow it to charge for 12
hours. After the initial charge,
a maintenance charge of 8
hours should be sufficient.
Installation and Registration of Accessory Handset
Getting
Started
i 5886 manualNov11.p65 11/12/2003, 9:50 AM 13