VTech i 5836 - Manual (Page 45)

43
Advanced
Operations
Handset and Base Operation
Mute Function
During an active call pressing either the MUTE soft-
key on the Handset or the MUTE softkey on the Base
(when in Speakerphone mode), will disable the mi-
crophone. Press MUTE again to return to normal two-
way conversation.
Hold Function
From the Handset:
• Press the HOLD softkey to place a call on hold. To return to the call, press the ON
(or SPEAKERPHONE ) key.
NOTE: The Handset will display CALL ON HOLD when
a call is placed on hold. If you have new calls in call log,
CALL ON HOLD will display alternately. An H will be
displayed to remind you a call is on hold.
From the Base:
•
• To return to the call, press either HOLD or SPEAKERPHONE.
NOTE: Base will display CALL ON HOLD when a call is placed on hold.
Flash Function
NATURAL - No frequency
enhancement (Your Handset
is preset with this selection).
The Handset will graphically display the four modes.
i 5886 manualNov11.p65 11/12/2003, 9:51 AM 43
If a call remains on Hold for 5 minutes, your i 5836
Handset will ring to remind you the call is being held.
The phone will display Call On Hold Ring Back! You
have 30 seconds to return to the call before it is
dropped.
During an active call, press the HOLD softkey to place a call on hold. The SPEAK-
ERPHONE LED will flash to indicate a call is on hold.
If a call remains on hold for 5 minutes, your i 5836 Base will ring to remind you the call is
being held. The phone will display CALL ON HOLD RING BACK! You have 30 seconds
to return to the call before it is dropped.
You can use your i 5836 with services such as
Call Waiting. Simply press the ON/FLASH key on
the Handset or the FLASH key on the Base (when
in speakerphone mode) to flash the line.
NOTE: The Sound Select feature can't be use when in
Speakerphone or Headset talk mode.
Natural Audio