VTech i 5836 - Manual (Page 49)

Additional
Information
47
Handset Accessories
To purchase a Headset, call VTech Customer Service at 852-2776-3223.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the
Handset. Connect the plug on the Headset cord to the jack (covered with a small
rubber flap) on the cordless Handset. The plug should fit securely. Do not force
the connection.
NOTE:
Whenever a compatible Headset is
connected to the cordless Handset,
the microphone on the Handset will
be muted. This is done to limit the
effect of background noise.
Belt Clip
The i 5836 is also equipped with a
detachable belt clip. Align the pins
on the inside edge of the clip with the
notches on the sides of the Handset.
The belt clip should snap securely
into place. Do not force the connection.
i 5886 manualNov11.p65 11/12/2003, 9:51 AM 53
Your
i 5836
cordless Handset is equipped with a 2.5mm Headset Jack for use
with an optional accessory Headset for hands-free operation. If you choose to
use the Headset option, you must obtain an optional accessory Headset that is
compatible with the
i 5836.
Many compatible Headsets have a
reversible, monaural design. This
means you can wear your Headseta
on either ear, leaving one ear free
for on either ear, leaving one ear
free for other conversation.