Vertex Standard VX-8R - Manual (Page 106)

VX-8R O
PERATING
M
ANUAL
104
character of the message you wish to store.
Example 1: Rotate the DIAL knob to select any of the 61
available characters.
Example 2: Press the key repeatedly to toggle among
the six available characters associated with that key: p Æ q Æ r Æ s Æ
P Æ Q Æ R Æ S Ж 7 Ж p .....
8. Press the key to save the first character of the personal
ID and move on to the next place.
9. Repeat steps 7 and 8 above to complete the personal ID (up
to 8 characters). If you make a mistake, press the key
to move back to the incorrect character, then re-enter the correct character.
10. Press and hold in the key for two seconds to delete all data after the cursor that
may have been previously stored.
11. When the personal ID entry is complete, press the key
briefly to save the new setting.
12. If you wish to store another personal ID, repeat steps 3
through 10 above.
13. Press the PTT switch to exit to normal operation.
S
ET YOUR
P
ERSONAL
ID
You may choose your personal ID from the member list as follows.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 58: MES- 58: MES- 58: MES- 58: MES- 58: MES-
SAGE REGISTER SAGE REGISTER SAGE REGISTER SAGE REGISTER SAGE REGISTER .
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the member box (1 1 1 1 1 ~ 20 20 20 20 20 )
where your ID is stored.
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
M
ESSAGE
F
EATURE
P
ROGRAMMING A
M
EMBER
L
IST