Vertex Standard VX-8R - Manual (Page 158)

VX-8R O
PERATING
M
ANUAL
156
S
ET
M
ODE
I
TEM
86: SET MODE CSR
Function: Selects the Set Mode Cursor.
Available Values: nine patterns ( / / / /
/ / / / )
Default:
S
ET
M
ODE
I
TEM
87: SET MODE FORMAT
Function: Selects the display format of the Set Mode operation.
Available Values: LIST / ITEM
Default: LIST
S
ET
M
ODE
I
TEM
88: SMART SEARCH
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE / CONTINUOUS
Default: SINGLE
SINGLE:
The transceiver sweeps the current band once in each direction starting
on the current frequency. All channels where activity is present (up to
15 in each direction) are loaded into the Smart Search memories. Whether
or not all 31 memories are filled, the search stops after one sweep in
each direction.
CONTINUOUS: The transceiver makes a sweep in each direction as with the “SINGLE”
mode, but if all 31 channels are not filled after the first sweep, the radio
continues sweeping until they are all filled.
S
ET
M
ODE
I
TEM
89: S-METER SYMBOL
Function: Selects the S- & TX PO meter Symbol.
Available Values: Four patterns (
, , , or )
Default:
S
ET
M
ODE
I
TEM
90: SPEAKER OUT
Function: Enables/Disables the FM Broadcast audio output to the internal speaker when
using the earphone antenna.
Available Values: AUTO / SPEAKER
Default: AUTO
AUTO:
The FM Broadcast audio output is selected automatically depending on the
connection of the earphone antenna.
SPEAKER: Routes the FM Broadcast audio output to the internal speaker and the ear-
phone.
S
ET
M
ODE
S
ET
M
ODE
S
ELECTION
D
ETAILS