Vertex Standard VX-8R - Manual (Page 156)

VX-8R O
PERATING
M
ANUAL
154
S
ET
M
ODE
I
TEM
73: PTT DELAY
Function: Selects the time delay before the carrier is transmitted, when the PTT switch is
pressed.
Available Values: OFF / 20ms / 50ms / 100ms / 200ms
Default: OFF
S
ET
M
ODE
I
TEM
74: RPT ARS
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON / OFF
Default: ON
S
ET
M
ODE
I
TEM
75: RPT SHIFT
Function: Sets the Repeater Shift Direction.
Available Values: SIMPLEX / –RPT / +RPT
Default: SIMPLEX
S
ET
M
ODE
I
TEM
76: RPT SHIFT FREQ
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.000MHz ~ 150.000MHz (50 kHz/step)
Default: Depends on the operating band and transceiver version.
S
ET
M
ODE
I
TEM
77: RX AF DUAL
Function: Select the resume mode of the AF-Dual Operation.
Available Values: OFF / TRX 1sec ~ TRX 10sec / HOLD / TX 1sec ~ TX 10sec
Default: TRX 2sec
S
ET
M
ODE
I
TEM
78: RX MODE
Function: Sets the receiving mode.
Available Values: AUTO / NFM / AM / WFM
Default: AUTO (Mode automatically changes according to operating frequency).
S
ET
M
ODE
I
TEM
79: SAVE RX
Function: Selects the Receive-mode Battery Saver interval (“sleep” ratio).
Available Values: 0.2sec ~ 0.9sec (0.1sec/step) or 1.0sec ~ 10.0sec (0.5sec/step)
Default: 0.2sec
S
ET
M
ODE
I
TEM
80: SAVE TX
Function: Enables/Disables the Transmitter Battery Saver.
Available Values: ON / OFF
Default: OFF
S
ET
M
ODE
S
ET
M
ODE
S
ELECTION
D
ETAILS