Vertex Standard VX-8R - Manual (Page 139)

VX-8R O
PERATING
M
ANUAL
137
S
ET
M
ODE
C
HANGING THE
S
ET
M
ODE
C
URSOR
The VX-8R has nine types of cursor symbol formats for the Set Mode operation. You may
change the default setting to any of the available symbols.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 86: SET 86: SET 86: SET 86: SET 86: SET
MODE CSR MODE CSR MODE CSR MODE CSR MODE CSR .
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired cursor symbol
type.
, , , , , , , , or
5. When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
M
ASKING THE
S
ET
M
ODE
I
TEMS
There may be situations where you want to “Mask” Set Mode Items so they are not re-
called during Set Mode Item selection.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 35: EX- 35: EX- 35: EX- 35: EX- 35: EX-
TENDED MENU TENDED MENU TENDED MENU TENDED MENU TENDED MENU .
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select “ON ON ON ON ON ”, then press the
key briefly.
5. Rotate the DIAL knob to select the Set Mode Item to be
“Masked”.
6. Press the key briefly. A “ ” icon will appear at the
right side of the Set Mode Item Number in the display, indi-
cating the Set Mode Item is to be Masked.
7. Repeat steps 5 and 6 above, to append the “ ” icon to any
other Set Mode Item you wish to “Masked”.
8 When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
To unmask the hidden Set Mode Item, repeat the above procedure. In step 4 above select
“OFF
OFF OFF OFF OFF ” and in step 6 above the “ ” icon will disappear from the Menu Item you wish to
unmask.
G
ENERAL