VTech VT5875 - Manual (Page 16)

 www.vtechphones.com
B
as
ic
o
pe
ra
tio
n
Flash function
You can use your phone with services such as call waiting . When you receive a call waiting signal,
simply press the FLASH key to switch to the new call . Press FLASH again to switch back to the
original call .
Redial function
• Press REDIAL to display the last telephone number dialed from the handset or base unit (up to
32 digits) . Use or to scroll through the five previously dialed numbers.
When the beginning or the end of the redial list is reached, a double beep will sound .
• When the desired number is reached, press ON or SPEAKER ( ) to dial .
• Press DELETE/MUTE on the handset (or DELETE on the base) to delete the number from the
redial memory .
• Press OFF/CLEAR on the handset (or EXIT on the base) to exit the redial review list .
Mute function
• During an active call, press the MUTE key on handset or base unit
to disable the microphone . The screen will display:
• Press MUTE again to return to normal two way conversation .
MICROPHONE ON will display briefly.
Conference call
Your phone is capable of supporting conference calls between system handsets or base . It is possible
to establish a conference between any two handsets (or a handset and the base) and the external
line .
If a handset or base already has a connection to the external line, and
any other handset or base goes off-hook, a conference is immediately
established . The handsets will show:
Telephone operation
• Use FLASH to
access other
phone company
subscriber
services, as
described by your
provider .
• To end a
conference call,
press OFF at
he handset or
on the base .
The conference
call will not be
terminated until
all handsets or
base unit have
disconnected
from the call .
PHONE 00:00:25
MICROPHONE MUTED
MUTE
PHONE 00:00:25