VTech VT5875 - Manual (Page 17)

 www.vtechphones.com
• If the returned
call is not
answered within
30 seconds, the
external call
will end
automatically .
• While in transfer
mode (before
releasing the
call) you may
toggle back and
forth between
the external call
(the display will
show OUTSIDE)
and the intercom
call (the display
will show
INTERCOM)
by pressing the
INTERCOM key .
Telephone operation
TRANSFER TO:
HANDSET 1
IS CALLING
CALLING
HANDSET 2
CALL TRANSFERRED
Volume control
Press the VOLUME button on the handset or press the VOLUME button on the base to adjust
listening volume . Each button press raises or lowers volume by one level . When you change the
volume level, the new setting is saved . The new volume level will be applied each time you use the
handset, speakerphone or headset .
Transferring calls
You can transfer calls between the base and any handsets registered to it .
While you are on an external call, using transfer allows you to speak to the person who answers at
the base or handset you are calling before releasing the external call to them .
• Press
INTERCOM key on the handset or base, it will display:
• Select the number of the handset to which the call is to be transferred
1-4 or 0 for base . For example if you intercom handset 2 the display
will show:
• Press ON, SPEAKER or INTERCOM on the handset or base being
called to answer the intercom call . You may now discuss the external
call with the person who answered the other handset or base .
• On the handset, press the OFF key to transfer the external call to the
other handset or base . (If transferring from the base, press SPEAKER
to transfer .)