VTech VT5875 - Manual (Page 5)

 www.vtechphones.com
Installation
For maximum performance of your cordless
telephone system:
1 . Choose a central location for your base
unit .
2 . Install your phone(s) as far away as
possible from any other cordless
(wireless) devices such as cordless
telephones, 802 .11 wireless routers (for
example, WiFi), etc .
3 . Install your phone(s) as far away
as possible from other electronic
equipment such as microwave ovens,
televisions, computers, etc .
4 . Install your telephone equipment away
from heat sources and sunlight .
5 . Avoid excessive moisture, dust or
extreme cold .
Install handset battery
a) Align the two holes in the plug with
the socket pins, then snap the plug
into place .
b) Place the battery in the compartment .
c) Replace cover by sliding it up into
place .
d) Place the handset in its base when
not in use to ensure maximum daily
performance .
e) Be sure to charge the battery for a
minimum of 16 hours before using your
phone .
Choose location
• Use only the VTech
battery pack supplied
with your phone .
• Place the handset in
its telephone base
when not in use to
ensure optimum
performance .
CAUTION: To reduce
the risk of fire or injury,
read and follow these
instructions:
1 . Use only the battery
supplied, or quivalent
2 . Do not open or
mutilate the battery
Released electrolyte
is corrosive and may
cause damage to the
eyes or skin It may
be toxic if swallowed
3 . Exercise care in
handling battery in
order not to short
the battery with
conducting materials
such as rings,
bracelets, and keys
The battery or
conductor may
overheat and cause
burns .