VTech VT5875 - Manual (Page 36)

3 www.vtechphones.com
B
as
ic
o
pe
ra
tio
n
Change PPU key setting
Your phone is factory programmed with the PPU keys, you can reprogram the codes to the numbers
provided by your local telephone company .
From the idle mode, press MENU/SELECT on the handset (or MENU/SEL on the base), use or
to scroll to FEATURE CODES, then press MENU/SELECT on the handset (or MENU/SEL on the
base) . Press or to scroll to BILLED SERVICES, then press MENU/SELECT on the handset (or
MENU/SEL on the base) . Use or to scroll to your desired option, then press MENU/SELECT
on the handset (or MENU/SEL on the base) .
You can access the following options:
Auto callback
Three-way calling
Repeat dialing
Reset all codes
Change auto call back number
The default AUTO CALLBACK number is * . If this does not match the number provided by your
local telephone company, you will need to edit the number .
Use or to scroll to AUTO CALLBACK, then press MENU/SELECT
on the handset (or MENU/SEL on the base) . The display will show:
Press DELETE/MUTE on the handset (or DELETE on the base). Enter
the new number provided by your local telephone company . To enter pauses, press and hold PAUSE .
When finished press MENU/SELECT on the handset (or MENU/SEL on the base) .
Custom pay-per-use (PPU) features
AUTO CALLBACK
*69 _