VTech VT5875 - Manual (Page 8)

 www.vtechphones.com
G
ett
in
g s
ta
rte
d
Installation
Wall mounting
Your phone base unit is designed to mount on a standard telephone wall plate . Wall mounting
is optional .
1 . Run the power and telephone line cords through the slots in the bracket, connecting them to the
jacks located on the underside of the base.
2 . Plug the adapter into an electrical outlet, and the connector to the bottom of the base unit .
3. Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to
the wall jack.
4 . Line up the tabs on the wall mount adapters with the holes at the bottom of the base unit . Snap
the wall mount bracket firmly in place.
5. Mount the base unit on the wall. Position the base unit so the mounting studs will fit into the holes
on the wall mount bracket . Slide base unit down on the mounting studs until it locks into place