Volkswagen 01M User Manual
Page 32
AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 32)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
APPLY CLUTCH PLATE APPLICATIONS
APPLY CLUTCH PLATE APPLICATIONS
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
Application Number Of Plates
Reverse Clutch
Inner ................................................ 5
Outer ................................................ 5
1st-3rd Clutch
Inner ................................................ 5
Outer
CLB & CLK ........................................... 5
CKZ ................................................. 4
4th Clutch
Inner
CLB & CKZ ........................................... 6
CLK ................................................. 5
Outer
CLB & CKZ ........................................... 5
CLK ................................................. 4
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
REVERSE APPLY CLUTCH
NOTE: Soak all friction-faced clutch plates in ATF for at least 15
minutes before installation.
1) Mark circlip for installation reference and remove.
Disassemble clutch plates. See Fig. 35. Compress spring support, and
remove circlip. Remove clutch piston.
2) Check for worn or damaged parts and replace as necessary.
Ensure check ball in clutch housing is not damaged. Piston seal is
part of piston. If damaged, replace reverse apply clutch piston.
Reassemble reverse apply clutch. See APPLY CLUTCH PLATE APPLICATIONS
table.
NOTE: Assembled clutch clearance specification is not available
from manufacturer. Ensure thrust plate is installed with
shouldered side facing circlip.