Volkswagen 01M - Manual (Page 59)

AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 59)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
pedal. Print screen.
4) While observing scan tool display, slowly press
accelerator pedal until display reads 50 percent. DO NOT release
pedal. Print screen.
5) While observing scan tool display, slowly press
accelerator pedal until display reads 75 percent. DO NOT release
pedal. Print screen.
6) While observing scan tool display, slowly press
accelerator pedal until display reads 99 percent. DO NOT release pedal
(resistance of kickdown switch should be felt). Print screen.
7) Continue pressing accelerator pedal to its stop while
observing fourth digit on right-side 8 digit display. Fourth digit
must change from 0 to 1, indicating kickdown. Hold for 5 seconds to
set throttle angle.
8) Release accelerator pedal, then press right arrow button
on scan tool. Select function 06 "END OUTPUT". Repeat procedure from
beginning.
9) Compare voltage readings and throttle angle percentages on
printout from first test with that of second test. If readings do not
match, throttle angle was set incorrectly.
10) If readings do match, road test vehicle and activate
kickdown switch several times to ensure proper operation.
WIRING DIAGRAMS