Volkswagen 01M - Manual (Page 37)

AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 37)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
Fig. 39: Removing & Installing Spring Circlip
Courtesy of Volkswagen United States, Inc.
3) Install new seal rings to clutch piston, and install
piston in clutch housing. Install plate springs. Compress spring
support and install circlip. See Fig. 39.
4) Install bottom thrust plate with smooth side facing clutch
plate. Install one inner splined and one outer splined clutch plate
into clutch housing. See Fig. 38.
5) Place inner plate carrier on bench. Install remaining
clutch plates to inner plate carrier. See
APPLY CLUTCH PLATE APPLICATIONS. Insert top thrust plate with smooth
side facing clutch plate. Install support ring with step tabs up after
installing thrust plate, friction plates and steel plates. See Fig. 40
.
6) Install inner plate carrier into clutch housing. Install
circlip in clutch housing. See Fig. 41.
Fig. 40: Installing Support Ring
Courtesy of Volkswagen United States, Inc.