Volkswagen 01M - Manual (Page 46)

AUTO TRANS DIAGNOSIS - 01M
Article Text (p. 46)
1996 Volkswagen Golf
For Volkswagen Technical Site
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, August 19, 1999 11:28PM
table.
DIFFERENTIAL ROLLER BEARING SPECIFICATIONS
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
Application Turning Torque
Including Transfer & Pinion Bearings
New Bearings .................... 33 INCH Lbs. (3.7 N.m)
Used Bearings ............... Same As Before Disassembly
Differential Side Bearings Only
New Bearings ................. 5-7 INCH Lbs. (.6-.8 N.m)
Used Bearings ............... Same As Before Disassembly
(1) - Recorded during disassembly. See FINAL DRIVE & TRANSFER
GEARS under TRANSAXLE DISASSEMBLY.
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
6) Install circlips to end of each axle. See Fig. 52. Install
"O" rings and new seals to drive axle flange. Fill space between seal
and dust lip with multi-purpose grease.
7) Install drive axle flanges to transaxle. Install and
tighten differential cover bolts to 21 ft. lbs. (28 N.m). Install
speedometer drive.
Fig. 51: Preloading Differential Side Bearings
Courtesy of Volkswagen United States, Inc.
Fig. 52: Installing Circlips To Axles
Courtesy of Volkswagen United States, Inc.