VTech 2338 - Manual (Page 12)

www.vtechphones.com 11
B
as
ic
o
pe
ra
tio
n
Telephone operation
BASIC OPERATION
Set handset ringer
You can select from four traditional ringers, thirteen musical ringers, or turn the ringer OFF .
1 . Make sure the handset is idle (off) .
2 . Press PROG .
3 . Press until the screen displays RINGER: and the current setting .
4 . Press SEL. The current setting blinks, and you will hear a sample of the ring tone .
5 . Press or to hear a sample of each ring tone .
6 . Press SEL to choose the desired ring tone . If you chose a musical ringer or one of your personal
ring tones, the handset will display, for example:
7 . Press or to adjust the volume level .
8 . Press SEL to confirm the volume setting. A confirmation tone will sound. To set ringer volume,
press and hold CID/VOL- or DIR/VOL+ keys .
Set date and time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call . If you do not have caller ID service, the date and time can be set manually:
1 . Make sure the handset is idle (off) .
2 . Press
PROG .
3 . Press until the screen displays DATE/TIME .
4 . Press SEL . The current month blinks .
5 . Use or to adjust the month, then press SEL .
6 . Repeat step 5 to adjust the day, hour, minute and or (to indicate am or pm) . You’ll hear a
confirmation beep.
������������� �����������
• If you set the
ringer volume to
OFF, the phone
will not ring during
an incoming call .