VTech 2338 - Manual (Page 6)

www.vtechphones.com 5
G
ett
in
g s
ta
rte
d
Installation
Installing handset battery
1 . Plug the battery connector securely into the jack inside the battery compartment according to the
color-coded label .
2 . Insert battery in the center of the battery compartment .
3 Press down on the wired side until the battery securely snaps into place .
4 . Neatly tuck the wires inside the battery compartment .
5 . Position the battery compartment cover and slide it towards the unit until it clicks into place .
6 . Put the handset in the base unit to start charging the new battery for at least 16 hours .
7 . After the battery is fully charged, press
ON on the handset and you should hear a dial tone .
• Use only the
VTech battery
and AC power
adaptor
supplied with
this telephone .
• Recharging of
a fully depleted
battery may take
up to 16 hours .
A fully charged
battery could
provide up to
5 hours of talk
time, or up to 5
days of standby
time .
• Place the
handset in the
base unit when
not in use to
ensure optimum
performance .
��� �����
���
����
�����
����