VTech 2338 - Manual (Page 34)

www.vtechphones.com 33
Additional information
Problem Suggestion
I hear noise in the
handset, and none of
the keys or buttons
work .
• Make sure the power cord is plugged in .
My handset does not
ring when I receive
a call .
• Make sure you have the ringer activated . Refer to the section(s) on ringer selection in this
user’s manual .
• Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack.
Make sure the power cord is plugged in .
• You may be too far from the base unit .
• Charge the battery in the handset for 16 hours . For optimum daily performance, return the
handset to its base when not in use .
• You may have too many extension phones on your telephone line to allow all of them to ring .
Try unplugging some of the other phones .
• The layout of your home or office might be limiting the operating range. Try moving the base
to another location, preferably on an upper floor.
• If the other phones in your home are having the issue, the problem is in your wiring or local
service . Contact your local telephone company (charges may apply .)
• Test a working phone at the phone jack . If another phone has the same problem, the problem
is the phone jack . Contact your local telephone company (charges may apply .)
• Other electronic products can cause interference with your cordless phone . Try installing
your phone as far away from these types of electronic devices as possible: wireless routers,
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless phones
• Your line cord might be malfunctioning . Try installing a new line cord .
Troubleshooting