VTech 2338 - Manual (Page 9)

www.vtechphones.com 8
Installation
Removable handset and base
plates
Your phone comes with additional handset
brackets and base plates of various
colors . These brackets and plates are
interchangeable to suit your mood or room
decor .
Handset brackets
1 . Carefully remove the handset’s top
bracket and/or bottom bracket by pressing
inward towards the center of the phone,
then pull the bracket off slowly .
2 . Attach the new top bracket and/or bottom
bracket by aligning the two sides of the
plate with the slots on the phone . Gently
push the brackets towards the center
of the phone until it locks securely into
place .
Base plate
1 . Carefully remove the base plate by
inserting your thumb in the slot just below
the FIND HANDSET button and lift the
color plate from the base .
2 . Align the tabs on the back of the new base
plate with the appropriate openings in the
base unit and then align the two front tabs
before snapping the plate into position .
1
1
2
2