Veo 802.11b - Manual (Page 56)

Page 56 of 69
5) Under PC (Server), select your camera or the camera's IP address from the list. If the camera is not listed,
select the link titled "My PC is not listed."
6) Leave Protocol as TCP.
7) Under Internal Port No type in: 80
8) Under External Port No type in: 80
9) Click on Add to save these settings.
10) Under the first box, next to the Enable checkbox, type in: VeoCam.
11) Under PC (Server), select your camera or the camera's IP address from the list. If the camera is not listed,
select the link titled "My PC is not listed."
12) Leave Protocol as TCP.
13) Under Internal Port No type in: 1600
14) Under External Port No type in: 1600
15) Click on Add to save these settings. The Observer should now be configured to work with your router and
be accessible from the Internet.
SpeedStream 2624 - Wireless DSL/Cable Router
1) Log into your router.
2) After you are logged in, click on Advanced->Virtual Servers.
3) Enter the following information on the page:
Line #1:
Private IP: Type in the camera's IP address. (Look on the Observer’s IP Address LCD
display for the last 3 digits of the camera’s IP address.)
Private Port: 80
Type: TCP
Public Port: 80
Line #2:
Private IP: Type in the camera's IP address. (Look on the Observer’s IP Address LCD
display for the last 3 digits of the camera’s IP address.)
Private Port: 1600
Type: TCP
Public Port: 1600
4) Click Enter to save the settings. The Observer should now be configured to work with your router and be
accessible from the Internet.
SMC (http://www.smc.com)
SMC2404WBR - Barricade Turbo 11/22 Mbps Wireless Cable/DSL Broadband Router
SMC7004VBR - Barricade Cable/DSL Broadband Router
SMC7004VWBR - Barricade Wireless Cable/DSL Broadband Router
1) Log into your router.
2) After you are logged in, click NAT on the left side of the page.
3) Click on Virtual Server on the left side of the page.
4) Enter the following information on the page:
Line #1:
Private IP: Type in the camera's IP address. (Look on the Observer’s IP Address LCD
display for the last 3 digits of the camera’s IP address.)
Private Port: 80
Type: TCP
Public Port: 80
Line #2:
Private IP: Type in the camera's IP address. (Look on the Observer’s IP Address LCD
display for the last 3 digits of the camera’s IP address.)
Private Port: 1600
Type: TCP
Public Port: 1600