Veo 802.11b - Manual (Page 6)

Page 6 of 69
1.2 Requirements
To connect the camera to your LAN:
Wireless Observer
(Infrastructure Mode)
Wireless Observer
(Ad-Hoc Mode)
Observer
802.11b (WiFi) Access point
802.11b (WiFi) network
interface card for PC
Open RJ-45 port on your
router/gateway
To view the camera web page
•
Web Browser – Internet Explorer for Windows 5.0 or higher
•
PC with Windows 98, Me, 2000, or XP connected to LAN
To run the included software applications
•
PC – Intel Pentium II or equivalent, 300MHz or above, 64MB RAM, 150 MB Hard Disk Space, 800x600
resolution with 16-bit color
•
Windows 98, Me, 2000, or XP
To access cameras from the Internet
•
Broadband Internet Connection (DSL, Cable Modem) with min. 128k upload speed
Note: A fixed IP address is not required to access cameras from the Internet. However, if the IP
address provided by your Internet Service Provider is dynamic (changing) then signing up for a
dynamic DNS service will make accessing from the Internet much more convenient. Signing up for a
DDNS is free and easy. Please refer to Section 7.6: Dynamic Domain Name Service (DDNS) for
more information.