VTech 2428 - Manual (Page 12)

8 Press or to change the setting. Choose Y (for Yes) if you wish the phone to
alert you to calls from this number by changing to a distinctive ringing pattern after
the first ring. Choose
N (for NO) for a normal ringing pattern.
9 Press SELECT or PROGRAM to confirm your selection. If you choose Y, a D
will be displayed with the directory entry.
Note: When memory is full the screen displays MEMORY FULL , an error tone
sounds, and you will not be able to store a new number until you delete a stored
number.
Edit a Number/Name Stored in Memory
1 Press MEM . The screen displays ENTER 0-9 .
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to edit, press SELECT. Then
press or until EDIT flashes.
4 Press SELECT. The screen displays the name and number. The flashing cursor
appears at the end of the name. Use , and the dial pad keys to edit the
name. Press SELECT to move on to edit the number. Press SELECT to move
on to edit the Distinctive Ring setting.
5 Press SELECT to save the edited information.
Delete a Number/Name Stored in Memory
1 Press MEM . The screen displays ENTER 0-9 .
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to delete, press SELECT. Then
press or until ERASE flashes.
4 Press SELECT. The screen displays ERASE NO YES and the number.
5 Press or until YES flashes.
6 Press SELECT.
Dial a Memory Number
1 Press MEM . The screen displays ENTER 0-9 .
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to dial, press SELECT. Then
press or until DIAL flashes.
4 Press SELECT. The phone automatically dials the number.
TELEPHONE MEMORY
10