VTech 2428 - Manual (Page 25)

The RBRC™ Seal
The RBRC ® Seal on the
nickel-cadmium battery
contained in our product
indicates that VTech
Communications, Inc. is
voluntarily participating in
an industry program to collect and
recycle these batteries at the end of their
useful lives, when taken out of service
within the United States and Canada.
The RBRC ® program provides a
convenient alternative to placing used
nickel-cadmium batteries into the trash or
municipal waste, which may be illegal in
your area.
VTech’s participation in RBRC ® makes it
easy for you to drop off the spent battery
at local retailers participating in the RBRC ®
program or at authorized VTech product
service centers. Please call 1-800-8-
BATTERYTM for information on Ni-Cd
battery recycling and disposal bans/
restrictions in your area. VTech’s
involvement in this program is part of its
commitment to protecting our environment
and conserving natural resources.
Remove the nickel-cadmium battery pack
by pressing on the Handset battery cover
and sliding downward.
RBRC ® is a registered trademark of
Rechargeable Battery Recycling
Corporation.
Technical
Specifications
The RBRC™ Seal
23
FREQUENCY CONTROL
Crystal controlled PLL synthesizer
TRANSMIT FREQUENCY
Base: 2411.15 - 2418.4 MHz
Handset: 912.75 - 917.10 MHz
RECEIVE FREQUENCY
Base: 912.75 - 917.10 MHz
Handset: 2411.15 - 2418.4 MHz
CHANNELS
30 Channels
NOMINAL EFFECTIVE RANGE
Maximum power allowed by FCC and IC.
Actual operating range may vary
according to environmental conditions at
the time of use.
SIZE
Handset : 43mm x 58mm x 205mm
Base : 166mm x 109mm x 50mm
WEIGHT
Handset : 170 grams
Base : 206 grams
POWER REQUIREMENTS
Handset : 400mAh NI-CD Battery Pack
Base :
9V DC @ 300mA
MEMORY
Speed Dial: 10 Memory locations, into 16
digits per location.
CID : Alpha Numeric Display
99
Memory locations
SPECIFICATIONS ARE TYPICAL
AND MAY CHANGE WITHOUT
NOTICE.