VTech 2428 - Manual (Page 14)

8 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y , a D will
be displayed with the directory entry.
Note: When memory is full the screen displays MEMORY FULL , an error tone sounds,
and you will not be able to store a new number until you delete a stored number.
Edit a Number/Name Stored in the Directory
1 Press ( ). The screen displays DIRECTORY .
2 Press or to scroll alphabetically through entries stored in memory
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3 When the screen displays the number you want to edit, press SELECT . Then
press or until EDIT flashes.
4 Press SELECT. The screen displays the name and number. The flashing cursor
appears at the end of the name. Use , and the dial pad keys to edit the
name. Press SELECT to move on to edit the number. Press SELECT to move to
edit the Distinctive Ring setting.
5 Press SELECT to save the edited information.
Delete a Number/Name Stored in the Directory
1 Press ( ). The screen displays DIRECTORY .
2 Press or to scroll alphabetically through entries stored in memory
-OR-
Press the dial pad key for the first letter of the entry you want to delete.
3 When the screen displays the number you want to delete, press SELECT . Then
press or until ERASE flashes.
4 Press SELECT. The screen displays ERASE NO YES and the number. The
current choice flashes.
5 Press or until YES flashes.
6 Press SELECT. You’ll hear a series of beeps confirming the deletion.
Dial a Number from the Directory
1 Press ( ). The screen displays DIRECTORY .
2 Press or to scroll alphabetically through entries stored in memory
-OR-
Press the dial pad key for the first letter of the entry you want to dial.
3 When the screen displays the number you want to dial, press SELECT. Then
press or until DIAL flashes.
4 Press SELECT. The phone automatically dials the number.
TELEPHONE DIRECTORY
12