Wayne-Dalton TELEPORT WDHC-20 - Manual (Page 15)

15
1. On Teleport™ select the mode, containing
the key to be deleted.
2. Press and hold SETUP until the last-selected
mode key blinks twice.
3. Enter 976 on the numeric keypad.
4. Press a mode key once (e.g., TV, DVD/VCR,
SAT, AMP.)
Deleting a Single Learned Key
This process returns the LEARNED Teleport™ key to its
original programming for the mode you select. You can
also delete LEARNED programming by teaching a different
function to the key. See “Programming a Learned Key” on
page 14.
NOTE: If more than 15 seconds pass between key presses,
the remote exits programming.
5. Press the key on Teleport™ containing the learned
function to be deleted, twice. The remote will blink twice.
6. Repeat Steps 2 through 4 for another key.
To exit programming, press and hold SETUP.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 15 seconds pass between key presses,
the remote exits programming.
1. On Teleport™ select the mode to be deleted.
2. Press and hold SETUP until the last-selected
mode key blinks twice.
2. Enter 976 on the numeric keypad.
3. Press a mode key twice (e.g. TV, DVD/VCR,
SAT, AMP) to clear all the learned keys for that
mode. The LED will blink twice.
4. Repeat Step 2 to delete another mode. To
exit programming, press and hold SETUP.