Wayne-Dalton TELEPORT WDHC-20 - Manual (Page 29)

29
PROBLEM: Device key does not blink when you press a
key.
SOLUTION: Replace the batteries with four(4) new AAA
batteries. See “Installing Batteries” on page 8.
PROBLEM: Device key blinks when you press a key, but
home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control
at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home
entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand being
set-up. Make sure all devices can be operated with an
infrared remote control.
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing Volume
Lock”on page 14.
PROBLEM: PLAY and STOP keys do not work on a
Motorola DCT-2000 cable converter.
SOLUTION: Re-program the SAT key for cable code 0476.
See “Programming Device Control” on page 9.
PROBLEM: Tried SEARCH METHOD and still could not find
a working code.
SOLUTION: Try SEARCH METHOD again after clearing out
the device key using the following procedure:
a) Press and hold SETUP until device key blinks twice.
b) Enter 992.
c) Press and release the device key to be cleared, twice.
PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 032. For Sharp, use TV
code 0093 and VCR code 0048.
TROUBLESHOOTING