Wayne-Dalton TELEPORT WDHC-20 - Manual (Page 16)

16
CHANGING VOLUME LOCK
Locking Volume Control To One Mode
(Global VolumeLock)
Volume Lock allows you to control the volume through the
device identified as having your primary speaker(s),
regardless of which mode (device) you are using. For
example: If you are watching a DVD and want to adjust the
volume, which is a TV function, you can simply press the
volume key up or down without pressing the TV mode key.
You can also perform Individual Volume Unlock on a
selected device to set its volume control for independent
operation.
NOTE: The audio mode’s (AMP) volume controls are active
regardless of Volume Lock settings. However, if you lock
the volume controls to the AMP mode, you will have control
of the audio device’s volume in all other modes
(i.e, VCR/ DVD, TV, SAT.) This can be advantageous if, for
example, you always listen to home entertainment devices
through your receiver’s speakers.
1. On Teleport™ press and hold SETUP until
the last-selected device mode key blinks
twice.
2. Enter 993. The last-selected device mode
key will blink twice.
3. Select a mode (TV, DVD/VCR, SAT, AMP)
which you want to use to control the volume.
The selected device mode key will blink
twice.
Now, when you press VOL+, VOL-, or MUTE, the volume of
the selected device (e.g. TV) is controlled regardless of
mode.
Continued next page...