Worth Data 5000 - Manual (Page 55)

54
Type in the name of the file you want to save, or use the default name as shown and click save. That's it! You don't have to do
anything on the TriCoder!
Program Files
1. Again, make sure you are connected with a C22 USB cable and that your TriCoder is turned on and is on the opening
screen.
2. Start Hardware Utilities if it isn't already running.
3. Click the TriCoder Manager tab on the Left Pane
4. Highlight the program name you want to upload in the right panel
5. Choose the directory or folder you want to upload your file to in the right panel
6. Click on the arrow between the panels or alt click and select Save As. Type in the file name you would like or accep the
default file name and press the Save button. That's it
Cloning your TriCoder
1. Make sure you are connected to the USB cable and that your TriCoder is turned on.
2. Start the Integrated Hardware Utilities if it isn't already running.
3. Click on the TriCoder tab
4. Click on TriCoder Manager
5. Click on Cloning in the far right panel.
6. Click on the Right Arrow
7. Select the directory or folder you want to upload your cloning file to Save As box.
8. Type in the name of the file (e.g. cloning.cln)
9. Click the Save button. The file is saved as "cloning.cln" in this example and you are finished!