White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 15)

SuperStat Pro User Guide 13
Replacing the Batteries in Your Thermostat
Quick Guide Step Description Thermostat Display
Press until OFF is
displayed. 1
Turn the system off by pressing the
SYSTEM button
one or more times until OFF is displayed in the area
where the time is normally displayed.
Remove cover.
2
Gently pull the cover straight off the base.
Note: Forcing or prying on the thermostat can cause
damage to the unit.
Install batteries.
3
Remove old batteries. Install fresh AA alkaline
batteries along the top of the base with the positive (+)
end to the left (see diagram on page 12).
Press to select the
desired mode. 4
Turn the system back on by pressing the
SYSTEM
button one or more times until the desired mode
(COOL, HEAT, or AUTO) is displayed.