White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 25)

SuperStat Pro User Guide 23
Setting Temporary Holds
Quick Guide Description Thermostat Display
Press to change
the setpoint to the
desired
temperature.
Be sure your screen shows the normal display. Press the up or down
arrow button to change the temperature setpoint higher or lower.
The HOLD icon below the Day of the Week bar will begin to flash,
indicating that you have placed a temporary hold on the system.
The system will return to its normal, pre-programmed schedule at
the beginning of the next period of the day interval or Critical price
period.
If you want to return to your normal programmed setting before the
temporary hold has defaulted back to your program, you can clear
the temporary hold by pressing the
RUN button.
HOLD will flash: