White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 24)

22 SuperStat Pro User Guide
Setting Holds
You can override your heating or cooling program by setting a temporary or permanent hold.
To clear holds, see “Clearing Holds” on page 25.
Temporary Holds
A temporary hold is when you override a programmed setting to be in effect until the next programmed time period
begins (Morning, Day, Evening, or Night). You do not have to manually clear a temporary hold. When your next
programmed time period begins, the temporary hold ends and the setting for the next time period is in effect. If desired,
however, you can manually clear the hold at any time.
The thermostat display indicates a temporary hold with a flashing HOLD icon below the Day of the Week.
Permanent Holds
A permanent hold is when you override a programmed setting for an indefinite period of time. A permanent hold lasts
until you manually clear it.
The thermostat display indicates a permanent hold by displaying the HOLD icon below the Day of the Week bar (not
flashing).
Use a permanent hold when you go on vacation or have guests in your home
and want to override your programmed settings for an extended period of
time. Don’t forget to clear it when you come back home or your guests leave.