White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 44)

Troubleshooting Assistance Guide
42 SuperStat Pro User Guide
Holds Hold override does not work.
A permanent Hold remains in effect independent of user schedule. To clear a permanent
hold, go to the device screen (idle screen) and press
RUN.
Temporary hold cannot be set.
• Make sure unit is set for Cool or Heat mode and try again to set the hold.
• If it still does not work, call Customer Service toll free at 1-888-232-5949.
Temporary hold disappears from the screen and allows the temperature to revert
to the normal settings.
Normal operation. A temporary temperature hold setpoint remains in effect until the next
program time period begins. A temporary hold is indicated by a flashing HOLD icon. If a
more permanent hold is desired, press the
HOLD button.