White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 43)

Troubleshooting Assistance Guide
Customer Service Toll Free 1-888-232-5949 41
Programming
(continued)
Thermostat current programmed setpoint does not match “programmed”
temperature.
Check to make sure that a Critical Event is not in effect. If a Critical Event is in effect, the
green light is On. The temperature will return to your programmed temperature when the
Critical Event ends.
How do I skip a time period?
There is no capability within the thermostat to skip a period. If you want a period to be
identical to the previous period, simply program it to the same start time and setpoint as
the previous period.
Vacation Mode
Can I program the thermostat for a vacation mode?
• For vacation, the cooling and heating can be set to a permanent Hold by pressing the
HOLD button and then pressing the up or down arrow button to select the desired
temperature.
• The heating and cooling system can be turned Off by pressing the SYSTEM button
until OFF and HEAT/COOL is displayed.