White Rodgers SuperStat Pro Programmable Thermostat - Manual (Page 23)

SuperStat Pro User Guide 21
Programming Heating and Cooling
Quick Guide Step Description Thermostat Display
Press until
setpoint is
flashing.
Press to set
temperature
setpoint.
6
Press the
TIME/SET button again. The temperature setpoint
for the system will begin to flash. Use the arrow buttons to
set the temperature setpoint.
Temperature will flash:
Repeat Steps 4
through 6. 7 Repeat Steps 4 through 6 until all of the periods have been
set for the selected day.
Repeat Steps 3
through 7. 8
After programming all of the periods for group of days you
initially selected, repeat Steps 3 through 7, selecting
another group of days to program until all 7 days are done.
Press once.
9
Press the
RUN button once to save and exit programming.