Wegener Communications UNITY 4600 - Manual (Page 67)

wegener.com 800032-01 Rev. G 61
A
PPENDIX
A M
ONITORING AND
C
ONTROL
D
ETAILS
A.1 Basic Navigation
Monitoring and control of the Unity 4600 from the front panel is accomplished by first
navigating to the appropriate screen for the desired function (see LCD screen
relationships and LCD screen content on page 30 for screen structure and contents).
Press ENT to move downward through menus and screen levels and ESC to return
upward through the screen structure. Press the right- and left-arrow buttons to move
between peer screens. The home screen may always be reached by pressing and
holding the
ESC button or by pressing it repeatedly.
A.2 Info Screens
Info screens are read-only and display information that cannot be edited. The home
screen is this type of screen. Other screens of this type display
Unity 4600 status or
navigation helps.
For info screens like the Software Application Version screen shown below, the text on
the second row will contain the current information (the software version in this
example). If no key presses are made, after a brief delay, the second row begins
alternating between this content and the following navigation prompts:
?
Other Screens?
@
(to move to other screens at the same level)
Menu Up? Press <ESC> (to move to the parent menu screen)
Home? Hold In <ESC> (to return to the Home screen)
first row: APPLICATION CURRENT: -information label
second row: V100 - content
APPLICATION CURRENT: APPLICATION CURRENT: APPLICATION CURRENT:
?
Other Screens?
@ Menu Up? Press <ESC> Home? Hold In <ESC>
after brief delay