Wegener Communications UNITY 4600 - Manual (Page 69)

www.wegener.com 800032-01 Rev. G 63
Unity 4600 User’s Manual
A.4 Parameter Screens
Parameter screens display a specific parameter that can be edited (if the correct authority
has been established). Such screens contain an alphanumeric or list-select field. There are
no carries or borrows when wrapping on a numeric field (i.e. to go from 0999 to 1000, 4
digits must be edited).
For parameter screens like the Unit Label screen below, the second row contains the
current value of the parameter. Upon pressing
ENT , a blinking underscore appears under
the first character to be edited (Only for editable alphanumeric fields. List-select fields will
not display a cursor). Use the arrow buttons to scroll through characters or list selections.
After making the desired change, press
ENT again to commit the entry to the Unity 4600 .
Press ESC if you wish to cancel the change. If no key presses are made, after a brief delay,
the second row begins alternating between the following prompts:
Change? Press <ENTER> (to begin editing the parameter)
?
Other Screens?
@
(to move to other screens at the same level)
Home? Hold In <ESC> (to return to the Home screen)
first row: UNIT LABEL: -information label
second row: Unity 4600 - editable parameter
UNIT LABEL: UNIT LABEL: UNIT LABEL:
?
Other Screens?
@ Menu Up? Press <ESC> Home? Hold In <ESC>
after brief delay